Super User

Nguyen Phan Anh

anhnp 21

Name: Nguyen Phan Anh
Rank: Lecturer
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.;
Telephone: (+8254) 372 1979
Fax: (254) 3.733579
Research Interests:
Address: Petrovietnam University, 762 Cach Mang Thang Tam street, Long Toan Ward, Ba Ria City, Vietnam.

Degree

Degree	Field	Institution	Year
PhD	Pipelines and Storage Construction and Repair	Gubkin University, Russia	September, 2018
MSc	Pipelines and Storage Construction and Repair	Gubkin University, Russia	June, 2015
BSc	Mechanical Engineering	Belarusian National Technical University	June, 2010

Rank

Rank	Month-Year
Lecturer	2019 - Present
Laboratorian	2011 – 2018
Mechanical Engineer	2010-2011

Own Thesis

Title	Type	Institution	Year
Разработка методов повышения несущей способности оснований РВС в гидрогеологических условиях Вьетнама	PhD	Gubkin University, Russia	2015 - 2018
Исследование возможности применения грунтовых модулей ГП-1500 при сооружении участка технологического проезда на слабом грунте для строительства газопровода в проекте ПМ3-КаМау во Вьетнаме	MSc	Gubkin University, Russia	2013 - 2015

Experiences (Academic)

Institution	Designation	Year/Period
Petrovietnam University	Head of Department of External Relations, Science and Technology	September 2019 - Present
Petrovietnam University	Lecturer	February 2019 – September 2019
Petrovietnam University	Laboratorian	November 2011 – February 2019

Experiences (non-Academic)

Organization	Designation	Year/Period
National Research Institute of Mechanical Engineering	Mechanical Engineer	Septermber 2010 – November 2011

Organization

Designation

Year/Period

National Research Institute of Mechanical Engineering

Mechanical Engineer

Septermber 2010 –

November 2011

Courses

Institution	Course No.	Course Name	Type	Level	Times	Last Time
Petrovietnam University	MEC32303	Mechanical Theory	Academic	Graduate	-	2019-Present
Petrovietnam University	PHY21101LAB PHY21102LAB	Physics Experiments	Academic	Graduate	-	2011-2019

Journal

no.	Information
1	Nguyen Phan Anh, Tuyen Vo, Khanh Dien Le, Thanh Nam Nguyen ”A Measure of Optimization of Technological Parameters to Improve the Formability of Aluminum Sheet a 1050 H14 by SPIF Technology”,Key Engineering Materials, Vol. 863, p. 51-58, 2020, https://doi.org/10.4028/www.scientific.net/KEM.863.51
2	Tuyen Vo, Thanh Nam Nguyen, Phan Anh Nguyen, Khanh Dien Le, Tan Ken Nguyen, Trung Le Tran “A Measure of Optimization of Technological Parameters to Improve the Formability of Stainless Steel Sheet SUS 304 by SPIF Technology”,Key Engineering Materials Vol. 863, p. 59-66, 2020, https://doi.org/10.4028/www.scientific.net/KEM.863.59
3	Le Van Sy, Nguyen Phan Anh, Vu Minh Hung, Nguyen Ha Trung “Studying and evaluating the use of demineralised water in Thermal power plants”,PetroVietnam Journal, Vol. 3, 2020 (in Vietnamese), 2020, http://www.tapchidaukhi.vn/BookDetail/nghien-cuu-danh-gia-viec-su-dung-nuoc-khu-khoang-tai-cac-nha-may-nhiet-dien-4asjvkzBHUC4tT_2x8_SYg.html
4	Nguyen P.A., Salnikov A.P. “Practical application and numerical modelling of vacuum consolidation of the basement of a vertical steel tank in building construction project of power plant Ca Mau in Viet Nam”, Pipeline transport: Theory and Practice, Vol. 5, p. 46-52 (in Russian), 2017
5	Vaxiliev G.G., Nguyen P.A. “Numerical modelling of soft soil stabilized by vertical drains in building construction project of power plant Ca Mau in Viet Nam”, Proceedings of Gubkin Russian State University of Oil and Gas, Vol. 2, p. 115-124 (in Russian), 2017
6	Vaxiliev G.G., Nguyen P.A. “Numerical model for thermal consolidation of the basement of a vertical steel tank on saturated soft soil”, Transport and storage of oil products and hydrocarbons, Vol. 1, p. 5-8 (in Russian), 2017
7	Vaxiliev G.G., Nguyen P.A. “Ensuring the sustainability of oil and gas installations and structures under engineering geological and hydro-geological conditions in Vietnam”, Pipeline transport: Theory and Practice, Vol. 5, p. 41-43 (in Russian), 2016

Research Projects

Code No.	Title	Institution	Position	Year
01/DIEN/ĐHDK /2018/KHCN	Studying and evaluating the use of demineralised water in Thermal power plants	Vietnam Oil and gas Group	Col.	2018-2019
GV1913	Measure of optimization of technological parameters to improve the formability of steel by SPIF technology	Petrovietnam University	PI	2019
GV2007	Investigation on the role of calcium on microstructure and pitting corrosion resistance of Mg-5Al-4Sn-based alloys	Petrovietnam University	PI	2020-present
01/KTQL(PVU) /2020/KHCN	Preparation of Lectures in Petroleum Exploration and Production, Petrochemical Refining, Oil Processing and Electricity for staffs of Vietnam Oil and Gas Group (1st Stage)	Vietnam Oil and gas Group	Col.	3/2020-Present

Published in Petroleum Engineering Faculty

Tagged under

Be the first to comment!

4. Fluid Mechanics Laboratory

Chemical Engineering Program	Formal Name	Courses		Layouts	Max Capacity	Assignable Area (Sq. m.)
	Mechanics of Fluid Lab	Mechanics of Fluid Lab		Lab	18	50
Entrance			Computer controlled fluid friction in pipes unit
Bernoulli’s theorem demonstration unit			Osborne- Reynolds demonstration unit

Published in Shared Labs

Tagged under

Be the first to comment!

2. Materials and Mechanical Laboratory

Petroleum Engineering Program	Formal Name	Courses		Layouts	Max Capacity	Assignable Area (Sq. m.)
	Materials and Mechanical Lab	Strength of Materials		Lab	8	60
Entrance			Lab layout
Document Cabinet			Tinius Olsen’s hydraulic Universal Testing Machine Model 300SL
Tinius Olsen's pendulum impact tester			Torsion Testing Machine
The Helios 350-V projector			The OBLF Analyzer

Published in Shared Labs

Tagged under

Be the first to comment!

Electricity - Electronics Laboratory

Petroleum/Chemical Engineering Program	Formal Name	Courses		Layouts	Max Capacity	Assignable Area (Sq. m.)
	Electricity -Electronics Lab	Electricity -Electronics; Electrical Circuit Analysis		Lab	24	60
Entrance			Lab layout
Power Supply, Data Acquisition Interface; Three phase circuit; 1-3 phase Transformers			AC Motor/Generator, DC Motor/Generator, R-L-C Loads
Power Supply, Three phase circuit; Data Acquisition Interface; R-L-C Loads			Electronic Devices, Osiloscop, Function Generators

Published in GE Shared Labs

Tagged under

Be the first to comment!

1. General Physical Laboratory

PE/CE/GE Program

Formal Name

Courses

Layouts

Max Capacity

Assignable Area (Sq. m.)

General Physics Lab

General Physics Lab 1
&
General Physics Lab 2

Lab

40

140

Entrance

Lab layout

Measurement of length

Measurement of volume and density

Inertia moment of rigid bodies

Hooke’s law

Simulated experiment of viscosity

Simulated experiment of ideal gases

Simulated experiment of Bernoulli’s equation

Transformer

Magnetic field outside straight conductors

Specific charge of the electron e/m

RLC measuring bridge

Newton’s ring

Interference by Fresnel’s mirror and biprism

Polarization of light

Published in Shared Labs

Tagged under

Be the first to comment!

Le Van Sy

LVS1

Name: Le Van Sy
Rank: Lecturer
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.;
Telephone: (+8254) 372 1979
Fax: (254) 3.733579
Research Interests:
Address: Petrovietnam University, 762 Cach Mang Thang Tam street, Ba Ria Ward, TP. Ho Chi Minh City, Vietnam.

Degree

Degree	Field	Institution	Year
Post-doc (VEF scholar)	Petroleum-Mechanical Engineering	The University of Tulsa, USA	2012
Ph.D.	Industrial Engineering and Manufacturing	University of Padua, Italy	2010
M.Sc.	Mechanical Engineering	University of Ulsan (UOU), South Korea	2007
B.Sc.	Mechanical Engineering	Ho Chi Minh university of Techology (HCMUT), Vietnam	2003

Societies

Name	Country	Membership	Year/Period
Scientific Committee PetroVietnam	Vietnam	Member	2017 - Now
Offshore Structure and Technology consortium	Vietnam	Member	2015 - Now

Experiences (Academic)

Institution	Designation	Year/Period	FT/PT
Petrovietnam University	Visiting Lecturer	2021-present
Petrovietnam University	Vice Rector, Lecturer	2017 – 2021	FT
Petrovietnam University	Director, Advanced Training Center, Lecturer	2014 – 2017	FT
Petrovietnam University	Lecturer	2011 – 2013	FT
PetroVietnam Project Board	Academic staff	2010 - 2011	FT
Ho Chi Minh university of Techology (HCMUT)	Teaching Assistant	2004 - 2005	FT

Honors and Awards

Name	Details	Year
The Best Paper Award	ICACE	2019
Gold Medal of Techmart 2018	Techmart	2018
VEF scholar fellowship	VEF	2012-2013

Conferences

No.	Information
1	MMMS2024 - The Fourth International Conference on Material, Machines, and Methods for Sustainable Development.
2	The international conference COTECH 2023 in Stavanger, Norway.

Journals

no.	Information
1	L. V. Sy, Modelling Mechanical Behaviours of Polypropylene Sheet for Incremental Forming Process using graphic method, International Journal of Materials Engineering Innovation, Published Online:May 30, 2025, pp 155-174, https://doi.org/10.1504/IJMATEI.2025.146440 (Scopus, Q4)
2	L. V. Sy, Comparison of the Ductile Damage Models for Fracture Prediction of the Incremental Sheet Forming, Int. J. Materials Engineering Innovation, Volume 16, No. 3, pp 214-231, 2025, https://doi.org/10.1504/IJMATEI.2025.147591 (Scopus, Q4)
3	N. T. Lan, L. V. Sy et al., “Nghiên cứu chế tạo robot phát hiện ăn mòn bồn nổi hình trụ đứng chứa xăng dầu,” Dầu Khí, no. 3, pp. 66–75, 2025, doi: 10.47800/PVSI.2025.03-08.
4	N. T. Lan and L. V. Sy, “A study on design optimization of MFL inspection system tailored for corrosion inspection of vertical storage tank by wall-climbing robots,” in Proc. 4th Int. Conf. Material, Machines, and Methods for Sustainable Development (MMMS 2024), Lecture Notes in Mechanical Engineering. Cham, Switzerland: Springer, 2025, pp. 313–322, doi: 10.1007/978-3-031-96126-7_39.
5	N. T. Lan and L. V. Sy, “Multi-area coverage path planning optimization for vertical oil tank inspection by wall-climbing robot,” in Proc. 3rd Vietnam Symp. Advances in Offshore Engineering, Lecture Notes in Civil Engineering, vol. 590. Singapore: Springer, 2025, pp. 643–652, doi: 10.1007/978-981-96-3912-0_62.
6	T. L. Nguyen et al., “Design of tank inspection robot using permanent magnetic wheels,” International Review of Mechanical Engineering, vol. 18, no. 9, pp. 481–490, Sep. 2024, doi: 10.15866/ireme.v18i9.25612.
7	N. T. Lan et al., “Enhancing inverted pendulum control using the ultimate period method under random disturbances,” U.P.B. Scientific Bulletin, Series D, vol. 86, no. 4, pp. xx–xx, 2024.
8	N. T. Lan and H. K. Tâm, “Nghiên cứu ứng dụng robot và phương pháp kiểm tra không phá hủy trong đánh giá ăn mòn bồn chứa nhiên liệu,” Dầu Khí, no. 5, pp. 69–78, 2024, doi: 10.47800/PVSI.2024.05-08.
9	L. V. Sy and N. T. Lan, “Selecting the inlet configuration for gas–liquid cylindrical cyclone separator,” IOP Conference Series: Materials Science and Engineering, vol. 1294, no. 1, Art. no. 012008, Dec. 2023, doi: 10.1088/1757-899X/1294/1/012008.
10	L. V. Sy et al., Novel tolerance sensor arms and magnetic sensor shoes for transverse flaw inspection module of the EMI system, The Third International Conference on Material, Machines, and Methods for Sustainable Development MMMS2022,
11	L. V. Sy et al., Influence of Operating Factors on Accurate Digging Depth Control of the Remote-Controlled Explosive Disposal Machine, Journal of Mechanical Engineering, Vol 20(3), 371-386, 2023, https://doi.org/10.24191/jmeche.v20i2.22050 (Scopus, Q3)
12	L. V. Sy et al., Naturally Occurring Radioactive Material waste management in the ASEAN oil and gas industry: a review, Journal of Hazardous, Toxic, and Radioactive Waste,vol. 28(3): 1247, 2023, https://ascelibrary.org/doi/10.1061/JHTRBP.HZENG-1247 (ESCI, Q2)
13	L. V. Sy et al., A Review of Mercury Waste Management in the ASEAN Oil and Gas Industry, Journal of Hazardous, Toxic, and Radioactive Waste, vol. 27(1): 04022044, 2023 https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000737 (ESCI, Q2)
14	L. V. Sy et al., Challenges And Prospects of Hazardous Waste Management In Asean Offshore Decommissioning, 3rd International Conference on the Decommissioning of Offshore & Subsea Structures (DECOM – 2022), pp 29-43.
15	L. V. Sy et al., Influence of lubricants and lubricating methods on surface roughness in the two‑point incremental sheet forming process, The International Journal of Advanced Manufacturing Technology, Vol. 121, pp 1365–1372, 2022, https://doi.org/10.1007/s00170-022-09435-2 (SCIE, Q1)
16	L. V. Sy et al., An Investigation of the Role of Calciumin the Microstructure of Mg-5Al-4Sn-Based Alloys and PittingCorrosion Resistance, Journal of Materials Engineering and Performance, Vol. 31,pp 8830–8839, 2022, https://doi.org/10.1007/s11665-022-06910-5 (SCIE, Q2)
17	L. V. Sy et al., Nghiên Cứu Chế Tạo Bộ Thiết Bị Phát Hiện Khuyết Tật Các Ống Thép Rời, Đường Kính Nhỏ Bằng Phương Pháp Rò Rỉ Đường Sức Từ, Tạp chí Dầu khí, vol. 3/2022, pp. 26-34, https://doi.org/10.47800/PVJ.2022.03-04
18	L. V. Sy et al., Accurate measurement of pipe wall reduction: High-precision instrument and minimization of uncertainties, Measurement, https://doi.org/10.1016/j.measurement.2022.112190 (SCIE, Q1)
19	L. V. Sy et al., Influence of Machining Parameters on the TPIF Formability for Aluminum Sheet at Room Temperature, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3)
20	L. V. Sy et al., Modelling and Simulation of the Hydraulic System on EODM Machine, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3)
21	L. V. Sy et al., Effect of Lubrication on Deforming the Aluminum Sheet with Two Points Incremental Forming Technology, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3)
22	L. V. Sy et al., Finite Element Simulation of The Formability by TPIF Technology For Aluminum Sheet at Room Temperature, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3)
23	L. V. Sy et al., Study on Cutting Power of Motorized Spindle using for Circular End Milling Process, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3)
24	L. V. Sy et al., Dynamic Analysis and Simulation of the Hydraulic Control System on the Remote-Controlled Explosive Ordnance Disposal Machine, International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), Vol 11-3, 18-27, http://doi.org/10.4018/IJMMME.2021070103 (ESCI, Q4)
25	L. V. Sy et al., Planar Hall sensor for quantitative measurement of pipe wall thickness reduction based on the magnetic flux density method, Measurement, https://doi.org/10.1016/j.measurement.2021.109782 (SCIE, Q1)
26	L. V. Sy et al., Sử dụng van tỷ lệ và van giảm áp trong điều khiển chính xác lực kẹp bom của máy đào gắp bom điều khiển từ xa, Tạp Chí Khoa Học Công Nghệ Hàng Hải,pp. 407-411, https://jmst.vimaru.edu.vn/index.php/tckhcnhh/article/view/221
27	L. V. Sy et al., Multi-Objective Optimization of Processing Parameters In WEDM With Stainless Steel-304 For Dieangular Cutting, Strojnicky Casopis - Journal of Mechanical Engineering, vol.71-2, 2021, pp.141-150, https://doi.org/10.2478/scjme-2021-0025 (Scopus, Q3)
28	L. V. Sy et al., Mechanical Design of Drill Pipe Inspection Machine, Advances in Asian Mechanism and Machine Science. ASIAN MMS 2021. Mechanisms and Machine Science, vol 113. Springer, Cham, pp. 324–334, https://doi.org/10.1007/978-3-030-91892-7_30
29	L. V. Sy et al., Đánh giá thành phần vận tốc hướng kính với công thức thực nghiệm trong bộ tách dầu/khí GLCC, Hội nghị Khoa học toàn quốc về Máy thủy khí và Hệ thống tự động hóa 2021 pp. 372 – 380.
30	L. V. Sy, Novel Steel Pipe Inspection System Based on Orthogonal Magnetizer, Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021), pp. 900–905, https://doi.org/10.1007/978-3-030-99666-6_132
31	L. V. Sy et al., A MIMO robust servo controller for two wheeled automated guided vehicles using a differential operator, Proceedings of the 2020 KSPSE Spring Conference pp. 49-50,
32	L. V. Sy et al., Experimental Study on Kinematic Parameter and Undulating Pattern Influencing Thrust Performance of Biomimetic Underwater Undulating Driven Propulsor, International Journal of Mechanical and Mechatronics Engineering (IJMME), Vol 20-05, 142-148.

Professional Development Activites

No.	Description
1	Member of National Scientific Committee in Mechanical Engineering, Fluid Mechanics
2	Reviewer: International journal of Advances in Mechanical Engineering, Advanced Convergence Engineering, Advances in Electrical Engineering and Related Sciences, PetroVietnam Journal,….etc.

Published in Petroleum Engineering Faculty

Tagged under

Be the first to comment!

Activities

1. Professional development

PE faculty actively search for practical and advanced training courses based on their professional development demands, professional knowledge and work practices. They are also often be sent to study short training courses abroad as part of educational cooperation and academic exchange agreements between PVU and leading petroleum universities or companies. In addition, they actively participate in national and international research projects related to petroleum to enhance research capabilities, deepen knowledge and share understanding and experience.
2. Conferences and workshops
PE faculty regularly attend national and international reputed conferences and workshops with presentations and articles published in the proceedings. They also often introduce such conferences and workshops (especially online ones) to PVU colleagues and regulators, universities and oil and gas companies in Vietnam to enhance and share professional knowledge. Furthermore, the PE Department actively organizes national and international conferences and workshops, by ourselves or in collaboration with other partners, if feasible.
3. Student engagement
PE faculty often provide students with job information and consultancy and connect businesses with students. They also meet students regularly to give more detailed explanations of the lectures and provide instructions for senior projects, graduation theses, researches and academic papers.
4. Community activities
PE faculty usually actively participate in environmental protection and other community support activities with students to make them aware of the national and international residents’ responsibilities.

Click to enlarge image 0a81ac7f3195c5cb9c84.jpg

View the embedded image gallery online at:
https://www.pvu.edu.vn/en/component/k2/author/493-superuser?start=320#sigProId7ad5df7b8b

Published in Petroleum Engineering

Tagged under

Be the first to comment!

Le Quoc Phong

phonglq cv

Last Updated on : March 26, 2020

Name: Le Quoc Phong
Rank:Lecturer
Department: Academic Affairs Department
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Telephone: (+84)(254)3738879 (Ext.170)
Fax: (254) 3.733579
Research Interests: Emission, Internal Combustion Engine
Address: Petroleum Faculty, Petrovietnam University, 762 Cach Mang Thang Tam street, Long Toan Ward, Ba Ria City, Vietnam.

Degree

Degree	Field	Institution	Year
Ph.D.	Internal Combustion Engine	Internal Combustion Engine Institute, University of Magdeburg, Germany	December, 2007
M.Sc.	Internal Combustion Engine	Hanoi University of Science and Technology	Aug, 2000
B.Sc.	Internal Combustion Engine	Hanoi University of Science and Technology	July, 1989

Experiences (Academic)

Institution	Designation	Year/Period
Petrovietnam University	Vice Rector	Oct 2022 - Present
Petrovietnam University	Manager of Academic Affairs Dept.	June 2010 – Oct 2022
Petrovietnam University	Lecturer, Researcher	June 2010 – Present
Thainguyen University	Manager of Academic Affairs Dept.	March 2009 – June, 2010
Thainguyen University of Technology	Lecturer, Researcher, Manager	March 2008 – March, 2009
University of Magdeburg	Ph.D Candidates	Oct 2003 – March, 2008
Thainguyen University of Technology	Lecturer, Researcher	Sep 2000 - Sep, 2003
Hanoi University of Science and Technology	Master Student	Sep 1998 – Sep, 2000
Thainguyen University of Technology	Lecturer, Researcher	Sep 1990 – Sep 1998

Journal

no.	Information
1	Environmental Impacts of Bio-Fuel. Petroleum Journal, PVN, 2013
2	Effects of Alternative Fuels on Thermodynamics Parameters of a Heavy-Duty Engine. International Conference of Transportation, DAAD, Đanang,2009
3	Effects of Alternative Fuels on Working Parameters of a Heavy-Duty Engine. International Conference of Transportation, Hanoi, 2010
4	Influences of Alternative Fuels on Emissions of a Heavy-Duty Engine. International Colloquium Fuels-Technische Akademie Esslingen, Germany, 2007
5	Influences of EGR and Alternative Fuels on Thermodynamic Parameters and Emissions of a Heavy-Duty Engine6th. International Colloquium Fuels-Technische Akademie Esslingen-Stuttgart-Germany, 2007

Published in Petroleum Engineering Faculty

Tagged under

Be the first to comment!

PE Labs Overview

All PE laboratories are mainly used for teaching undergraduate PE courses with the exception of the PVU-BHGE Center for Geomechanics Applications which is also used for faculty and student research.

The Program operates 5 teaching laboratories:

1. Laboratory of Reservoir Petrophysics and Rocks

2. Drilling Fluid and Cementing Laboratory

3. Reservoir Laboratory

4. PVU-Schlumberger Center

5. PVU-BHGE Center for Geomechanics Applications

PVU also has 6 fundamental engineering-shared laboratories and 2 engineering-shared laboratories with Petrovietnam Manpower Training College, respectively:

Published in Labs

Tagged under

Be the first to comment!

Analytical chemistry laboratory

Chemical Engineering Program	Formal Name	Location	Courses	Layouts	Max Capacity	Assignable Area (Sq. m.)
Chemical Engineering Program	Analytical Chemistry Laboratory	The second floor, PVU building	Analytical Chemistry Lab	Lab	20	60
Lab layout			Entrance
Working table			Water Distillation Water distillation provides the distillated water for lab