| 1 |
Van Sy Le (et al.), Positioning and Trajectory Tracking for Caterpillar Vehicles in Unknown Environment. International Journal of Control, Automation and Systems, 2020. SCIE index (IF = 2.181) |
| 2 |
DaeHwan Kim, Le Van Sy. A MIMO Robust Servo Controller for a Two Wheeled Automated Guided Vehicles Using a Differential Operator. 2020 KSPSE Spring Conference, 2020. (Scopus). |
| 3 |
Seungmin Kim, Le Van Sy. Reliability Centered Maintenance for Large Volume of Pumping Process: A Case Study, 2nd International Conference on Advanced Convergence Engineering (ICACE) 2019. (K-SCI index). |
| 4 |
Le Van Sy, Dang Thuc Van, Selection of an optimizing inlet angle for the gas-liquid cylindrical cyclone separator on hydrokinetic behavior, 2nd International Conference on Advanced Convergence Engineering (ICACE) 2019. (K-SCI index) |
| 5 |
Le Van Sy (et. al.) Design of a lightweight magnetizer to enable a portable circumferential MFL system, IEEE Transactions on Magnetics. (SCI index, IF=1.1467). |
| 6 |
Le Van Sy, (et. al.) Highly Sensitive Planar Hall Magnetoresistive Sensor for Magnetic Flux Leakage Pipeline Inspection, IEEE Transactions on Magnetics. (SCI index, IF=1.1467). |
| 7 |
Le Van Sy, Influence of Inlet angle on flow behavior and performance of GLCC, Particulate Science and Technology, 2017 (SCIE index, IF=0.523). |
| 8 |
Le Van Sy, Pham Thi Minh Hue, implement a Modified Viscoplasticity Based on Overstress Model into Numerical Simulation of the Incremental Sheet Forming Process, Advanced Engineering – Theory and Applications, 2016. (ISI index) |
| 9 |
Le Van Sy, Nguyen Thanh Nam, Hot Incremental Forming Of Magnesium And Aluminum Alloy Sheets By Using Direct Heating System. Journal of Engineering Manufacturing, 2013 (SCI index, IF=1.982) |
| 10 |
Le Van Sy, Nguyen Thanh Nam, Effect of Strain Rate And Temperature On Formability Of Warm-Incremental Forming Process With Magnesium Alloy Sheet AZ31, Journal of Manufacturing Technology Research. (Scopus index) |
| 11 |
Le Van Sy, Calibrating A Fracture Criterion For A Numerical Simulation Of Warm-Incremental Forming Process. AETA 2015: Recent Advances in Electrical Engineering and Related Sciences, Volume 371 of the series Lecture Notes in Electrical Engineering, pp 857-867. (ISI index) |
| 12 |
Le V. Sy, Nguyen T. Nam. Numerical Simulation Of Incremental Forming Process For Polymer Sheets. International Journal of Modelling and Simulation, Vol 32-4, pp 265-272. (Scopus index). |
| 13 |
V. S. Le , A. Ghiotti, G. Lucchetta, Preliminary Studies on Single Point Incremental Forming for Thermoplastic Materials, International Journal of Material Forming, Vol. 1, Issue 1, pp 1179-1182, (SCIE index). |
